Dismantled the winch on the rear deck. It was totally freezed last summer and hardly rotated when I tried to use it. The shaft was oxidated from the drum which caused it. I dismantled the wich, cleaned the parts (quite oxidated) and rebuilt it with no grease since only light oil is recommended. I will […]
Read moreLaunch
Mast moved out and getting some varnish
Mast was moved to the pier and got some layers of varnsih. Should remove all the varnish and start from scratch but this year no time for that.
Read moreHitsaushommat tehty
Hitsaukset on tehty. Tässä muutama kuva vesitankin kohdalla olleista rei’istä ja mitä niille tehtiin. Tässä reikiä vesitankin kohdalla. Numerot ovat paksuusmittausten tuloksia. Aluksi ajattelin tehdä kaksi pientä paikkaa, mutta aikani pähkäiltyäni päätin tehdä yhden ison reiän ja siihen sopivan palan. Tässä 4mm teräs sovitettuna paikoilleen ja hitsausta odottamassa. Pala kevyesti kiinni. Tässä kokonaan hitsattuna. Sama […]
Read moreZinc, zinc.....
Found this text at www.boatdesign.net site, talking about zinc and how much should a boat have it: Here’s something to go on from a guide I wrote a while back. This is the ’ideal’ protection regime. If the paint job is a good thick epoxy job and the boat is hauled a least annually then […]
Read moreThe first launch 1964 - video
Here is the first launch as documented by three different movie cameras. http://dasboot.yachteq.com/wp-content/uploads/2018/06/Ariadne-Stapellauf-1964-YouTube.webm
Read more