Mainly just messing around This year’s Ariadne’s summer story is mostly about getting ready to sail, you only get to sail at the end, so if that’s all you’re interested in, you should go to On the move. During the winter, the most memorable Ariadne events of the previous summer were always brought back to […]
Read more
Zinc, zinc.....
Found this text at www.boatdesign.net site, talking about zinc and how much should a boat have it: Here’s something to go on from a guide I wrote a while back. This is the ’ideal’ protection regime. If the paint job is a good thick epoxy job and the boat is hauled a least annually then […]
Read moreAttacking bilge with chisel and hammer
Quite dusty work to clean bilge with chisel and hammer and locating possible rust problems.
Read more
Holes?
What the h..ll? While going thu bilge and possible rusty places I managed to create a hole. First I thought that I made a hole to the integrated water tank, but since I saw daylight thru the hole I understood that there is a hole in the hull….. After a 15 minute break, I studied […]
Read more